STM Cone Loading machine, the cone lander.
Load in full stacks straight from the box of paper cones and then load STM 72-count trays of cones every 2-3 seconds. Each Cone Lander is specific to a cone size and to do more than one size requires a different Cone Lander for that size. Current supported paper sizes are 84mm, 98mm and 109mm.
Works best with Zig Zag brand cones. Other brands works as well, however, the success rate may not be as high due to quality and variances in cone sizes and diameters.
Note: Cone lander only loads one specific size per machine.
Step 1
Open the door, pull out the side drawer, and load full stacks of pre-rolled cones. Close the drawer and door.
Step 2
Open the front door, pull out the drawer, and place an empty STM 72-count tray into the drawer. Close the drawer and front door.
Step 3
Select the crutch size with the selector switch. Press the button on the right side of the machine to initiate cone loading into the tray. Wait 1-2 seconds, remove the loaded tray, and repeat the steps to load more trays if needed.
PLEASE CONTACT YOUR SALES REPRESENTATIVE TO ORDER THIS PRODUCT