Portable WR-2 Foam / Rinse / Sanitize W/ Pistol Grip Gun Kit

Portable WR-2 Foam / Rinse / Sanitize W/ Pistol Grip Gun Kit

975297

Regular price $1,849.61
/
Shipping calculated at checkout.

Portable WR-2 Foam / Rinse / Sanitize W/ Pistol Grip Gun Kit/h3>

The Portable WR-2 Foam/Rinse/Sanitize System is a combination medium volume airless foam applicator featuring a rinse mode and an all stainless steel cart assembly. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. The foaming solution then flows through the discharge hose to the airless foam wand which draws in atmospheric air to create and project wet, clinging foam on to any surface up close or at distances up to 6 feet. Quick connect the pistol grip gun to apply sanitizer or to rinse.

KEY FEATURES

  • Designed for foam cleaning, rinsing and sanitizing medium to large sized areas where compressed air is not available
  • Projects wet, clinging foam which increases chemical contact time and effectiveness
  • Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
  • Quick connect the pistol grip gun to rinse at full pressure and to apply sanitizer as a spray
  • Chemical resistant components ensure years of outstanding performance with minimal maintenance
  • Use it where 35-125 PSI water is available
  • Water pressure gauge eliminates guessing, reduces set-up time, and helps with troubleshooting

INCLUDES

  • All stainless steel 4-wheel cart with integrated hose rack
  • Non-marking tires with stainless steel swivel casters
  • 2 stainless steel, round, 5 Gallon jug racks (square optional)
  • Machined polypropylene manifold and injector body
  • Easy-to-read pressure gauge for incoming water
  • 20 color-coded metering tips for setting dilution ratios
  • Ball valves to alternate foaming, rinsing and sanitizing
  • 50' hose and discharge assembly
  • Quick connect machined polypropylene airless foam wand
  • Quick connect insulated pistol grip gun with fan nozzle and nozzle protector

Requirements

WATER

  • Temperature - up to 160°F
  • Pressure - 35-125 PSI
  • Supply Line - 1/2"

FLOW

  • 4 GPM @ 40 PSI
  • Foam - 1/2" ID x 50'
  • Rinse - 1/2" ID x 50'
  • Sanitize - 1/2" ID x 50'

NOZZLE

  • Foam - A-25 Airless Foam Wand
  • Rinse - 2550
  • Sanitize - 2550

DILUTION RATIO RANGE @ 40 PSI

  • Foam - 306:1 to 6:1
  • LSanitize - 457:1 to 7:1
Safety Documents

PRODUCT INSTRUCTIONS

PRODUCT INFORMATION


Recently viewed