Portable WR-1 Foam / Rinse W/ SmartWand

Portable WR-1 Foam / Rinse W/ SmartWand


Prix régulier $1,319.79
Frais d'expédition calculés lors du passage à la caisse.

Portable WR-1 Foam / Rinse W/ SmartWand

The Portable WR-1 Foam/Rinse System is a combination medium volume airless foam/rinse applicator featuring the unique all-in-one SmartWand™ and an all stainless steel cart assembly. This venturi injection system uses city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. The solution then flows through the discharge hose and the SmartWand™ which draws in atmospheric air to create and project wet, clinging foam on to any surface up close or at distances up to 6 feet. Open the rinse valve and rotate the SmartWand™ to the rinse position to rinse at full pressure.


  • The SmartWandTM is a unique all-in-one device for alternating between projecting airless foam and a fan pattern rinse
  • Use the SmartWandTM to project airless foam at distances up to 6 feet or to rinse at full pressure
  • Designed for foam cleaning and rinsing medium to large sized areas where compressed air is not available
  • Projects wet, clinging foam which increases chemical contact time and effectiveness
  • Use it where 35-125 PSI water is available
  • Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
  • Chemical resistant components ensure years of outstanding performance with minimal maintenance
  • Water pressure gauge eliminates guessing, reduces set-up time, and helps with troubleshootinge


  • All stainless steel 2-wheel cart with non-marking tires
  • Stainless steel integrated hose rack
  • Stainless steel, round, 5 Gallon jug rack (square optional)
  • Machined polypropylene manifold and injector body
  • Easy-to-read pressure gauge for incoming water
  • Ball valves for alternating between spray and rinse
  • 20 color-coded precision metering tips to set dilution ratios
  • 50' discharge hose, ball valve and insulated pistol grip gun
  • Machined polypropylene SmartWandTM


  • Temperature - up to 160°F
  • Pressure - 35-125 PSI
  • Flow - 4 GPM @ 40 PSI
  • Supply Line - 1/2"


  • Foam - 306:1 to 6:1


  • Spray - 1/2" ID x 50'
  • Rinse - 1/2" ID x 50'


  • Spray - SmartWand
  • Rinse - SmartWand
Safety Documents



You may also like

Vu récemment